Thursday, May 11, 2017




A temporary stop of blog activities | You can follow me on Twitter @Paul_PC4T



at

2 comments:

  1. Hallo Paul, we zien je wel weer online komen.
    Fijne zomer.
    73 Hans, PE1BVQ5

    ReplyDelete
    Replies

    1. Hallo Hans, ja waarschijnlijk wel ;-) Ik ben gewoon dagelijks actief hoor op HF en 6 meter. Jij ook een fijne zomer. 73 Paul

      Delete

Subscribe to: Post Comments (Atom)

Popular Posts

  • (no title)
    A temporary stop of blog activities | You can follow me on Twitter @Paul_PC4T
  • Hy End Fed Antenna
    I ordered by PA3EKE the Hy End Fed Antenna for 20 meter. It is similar like the PAR end fed antenna. It is an end fed dipole but this one ca...
  • The HyEndFed antenna, and how does it perform on other HF bands?
    As most of my regular readers know, I use a HyEndFed antenna for HF. The multiband for 40, 20 and 10 meter (11,5 meter long) It does outper...
  • Solar Eclipse
    Solar eclipse at the International Space Station, here at my QTH it's cloudy. By the way the picture is a fake composite image I was WSP...
  • Super Bazooka Antenna
    The PKW Super Bazooka is a highly abridged vertical antenna without radials for 1,8-30 MHz. With its length of only 3.4 m. The Super Bazoo...
  • INAC Magnetic Loop AX-330
    Could this be the antenna solution for amateurs with a little space? Especially for digimodes like JT65, JT9 and WSPR. http://inac-radio.co...
  • 100 mW @ 40 meter
    QRPp with 100 mW om 40 this afternoon. The pictures shows only my TX activity
  • Question about MSK144
    I like to listen for Meteor Scatter on 50 MHz. But when I use WSJT-X I can't set the frequency on 6 meter or higher. Do I use the wrong ...
  • RX op 630m WSPR
    PE4BAS (Bas) was experimenting with WSPR RX on 630 meter. I never listened on 630 m WSPR before. I tuned my HyEndFed (10-20-40 m) for 160 m ...
  • Back from Sal [Not Amateur Radio]
    We spent our holiday on Sal, an island in the Cape Verde. Just for a week, without a my radio, to enjoy sun and beach. I could have worked a...